All guides

How to Get a PDF Under 1 MB, 2 MB or 5 MB

Why scanned PDFs are so big, and practical ways to get one under 1, 2 or 5 MB: better scan settings, dropping or splitting pages, and rebuilding from photos.

By Pix2Doc Team,

Upload limits for PDFs are everywhere: "maximum 1 MB" on a scholarship portal, "under 2 MB" for a certificate on a job site, "5 MB" for an insurance claim. Meanwhile, a three-page document scanned on an office machine or photographed on a phone can easily be 8 MB or more.

This guide is honest about what works. For a scanned PDF, the biggest savings almost always come from how the pages were captured, not from a "compress" button.

Why scanned PDFs are so big

A PDF made from Word, Google Docs or a bank's website stores text as text: letters, fonts and positions. That takes very little space, and such PDFs are often well under 1 MB even with many pages.

A scanned PDF, or one made from phone photos, is different. Each page is a picture of the paper. The file size depends on:

  • Resolution (DPI). A page scanned at 600 DPI has four times as many pixels as the same page at 300 DPI, and nine times as many as at 200 DPI.
  • Colour. A colour scan stores three colour channels for every pixel. A greyscale scan stores one.
  • How the images are stored. Some scanners save pages with little or no compression.
  • Number of pages. Every page is another full image.

So a ten-page colour scan at 600 DPI can be tens of MB, while the same pages at 150 DPI greyscale are often a small fraction of that.

Option 1: rescan at sensible settings

If you still have the paper and a scanner, this is the most effective fix. Typical settings that keep text readable and files small:

  1. Resolution: 150 to 200 DPI. This is enough for printed text and signatures to be clearly readable on screen. Go higher only if the portal asks for it or the document has very small print.
  2. Colour mode: greyscale. Use colour only when colour matters, such as a coloured stamp, a photo ID or a certificate where the portal asks for colour.
  3. Format: PDF, and choose the scanner's "compressed" or "standard" quality option rather than "high" or "best", if it has one.
  4. Scan only the pages you need. Leave out blank backs of pages.

Check the result. Zoom in on the smallest text and any signature. If it's readable, you're done.

Option 2: drop pages you don't need

Portals often ask for "the first page of your passbook" or "pages with your marks", while the scan includes every page. Removing extra pages reduces the size directly, because each page carries its own image.

  • To keep only some pages, open Compress PDF. It lets you drop pages you don't need and removes unneeded data from the file in the same step.
  • To break a long PDF into several smaller files, use Split PDF. This is useful when a portal has separate upload boxes, or when an email provider limits each attachment.
  • If you split something you need to recombine later, Merge PDF joins files back together.

Option 3: rebuild the PDF from resized photos

If you made the PDF from phone photos, or you don't have the paper to rescan, rebuilding it is often the best route. You control the pixel size of each page, and that controls the file size.

  1. Get the page images. If you have the original photos, use them. If you only have the PDF, PDF to Images turns each page into an image file.
  2. Resize each page with Resize Image to KB. An A4 page at 150 DPI is about 1240 × 1754 pixels, which is plenty for reading text. Set the dimensions to around that and pick a KB range that suits your limit. For example, if a four-page PDF must be under 1 MB, aim for roughly 150 to 200 KB per page to leave some room.
  3. Combine them with Images to PDF. Add the pages in order and create the PDF.
  4. Check the final size and readability. The converter saves each page as a high-quality JPG inside the PDF, so the PDF can come out somewhat larger than the images you added. If it's over the limit, go back to step 2 with a smaller pixel size or KB range.

Two tips for photographed documents: crop away the table or background around the paper before resizing, and photograph in good, even light. Shadows and a grey cast make the image harder to compress and harder to read.

What our PDF compressor can't do

It's worth being clear about this so you don't waste time.

Pix2Doc's Compress PDF runs in your browser and does two things: it removes data the PDF doesn't need, and it lets you drop pages. On PDFs created from Word or a website, or ones with lots of leftover data, that can make a useful difference.

It does not recompress the images inside a PDF. A scanned PDF is mostly images, so running it through our compressor on its own will usually make only a small difference. If you need a big reduction on a scanned document, use one of the three options above.

Some other tools do recompress images inside PDFs, usually by uploading the file to a server. If you choose to use one, think about what's in the document first. For bank statements, ID documents and certificates, our guide on whether online PDF tools are safe has a short checklist.

Quick reference

  • Text PDF over the limit: try Compress PDF and drop any pages you don't need.
  • Scanned PDF, paper available: rescan at 150–200 DPI in greyscale.
  • Scanned PDF, no paper: convert to images, resize each page, rebuild with Images to PDF.
  • Long document, per-file limit: split it into parts.
  • Phone photos of documents: crop, resize to about 1240 pixels wide, then combine.

Whichever route you take, open the final file and read it through once before uploading. A small file that the reviewer can't read will only cause delays later.